ENK‑102 reverse osmosis membrane antiscalant is specially developed for water with high hardness, high alkalinity and high pH value. It effectively inhibits calcium carbonate scale and calcium sulfate scale in reverse osmosis systems. It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition. It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ ENK‑102 reverse osmosis membrane antiscalant is specially developed for water with high hardness, high alkalinity and high pH value. It effectively inhibits calcium carbonate scale and calcium sulfate scale in reverse osmosis systems.
▲ It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ JQSY membrane antiscalant is applicable to reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ It features good solubility and stability.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Light‑yellow transparent liquid |
| pH (1% solution) | 2.5±1.0 |
| Specific Gravity (20℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosing concentration according to water quality analysis report and system conditions. The dosage recommended by JQSY technical engineers is generally 3‑8 ppm, diluted 10‑fold with demineralized water.
▲ Dose the chemical agent upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing reverse osmosis antiscalant solution.
▲ Clean the chemical tank regularly to prevent bacterial growth.
ENK‑102 Reverse Osmosis Membrane Antiscalant (For High‑Hardness & High‑Alkalinity Water). Take proper labor protection during operation. Avoid contact of this acidic antiscalant with skin and eyes. In case of contact, rinse with plenty of clean water.
▲ ENK‑102 reverse osmosis membrane antiscalant is specially developed for water with high hardness, high alkalinity and high pH value. It effectively inhibits calcium carbonate scale and calcium sulfate scale in reverse osmosis systems.
▲ It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ JQSY membrane antiscalant is applicable to reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ It features good solubility and stability.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Light‑yellow transparent liquid |
| pH (1% solution) | 2.5±1.0 |
| Specific Gravity (20℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosing concentration according to water quality analysis report and system conditions. The dosage recommended by JQSY technical engineers is generally 3‑8 ppm, diluted 10‑fold with demineralized water.
▲ Dose the chemical agent upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing reverse osmosis antiscalant solution.
▲ Clean the chemical tank regularly to prevent bacterial growth.
ENK‑102 Reverse Osmosis Membrane Antiscalant (For High‑Hardness & High‑Alkalinity Water). Take proper labor protection during operation. Avoid contact of this acidic antiscalant with skin and eyes. In case of contact, rinse with plenty of clean water.
