ENK‑104 reverse osmosis membrane antiscalant is specially developed for high‑silica water. It can effectively control silica content up to 400 ppm on the concentrate side. It can effectively inhibit inorganic scaling within a wide concentration range. The allowable LSI value can reach up to 3.0 without acid addition. It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ ENK‑104 reverse osmosis membrane antiscalant is specially developed for high‑silica water. It can effectively control silica content up to 400 ppm on the concentrate side.
▲ It can effectively inhibit inorganic scaling within a wide concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ This membrane antiscalant is compatible with reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ It features good solubility and stability.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Light‑yellow transparent liquid |
| pH (1% solution) | 2.0±1.0 |
| Specific Gravity (20℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosage according to water quality analysis report and system conditions. Typical dosage of this reverse osmosis antiscalant is 2‑6 ppm, diluted 10‑fold with demineralized water.
▲ Dose the chemical agent upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing antiscalant solution.
▲ Clean the chemical tank regularly to prevent bacterial growth.
ENK‑104 Reverse Osmosis Membrane Antiscalant (For High‑Silica Water). Take proper labor protection during operation. Avoid contact of membrane antiscalant with skin and eyes. In case of contact, rinse with plenty of clean water.
▲ ENK‑104 reverse osmosis membrane antiscalant is specially developed for high‑silica water. It can effectively control silica content up to 400 ppm on the concentrate side.
▲ It can effectively inhibit inorganic scaling within a wide concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ This membrane antiscalant is compatible with reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ It features good solubility and stability.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Light‑yellow transparent liquid |
| pH (1% solution) | 2.0±1.0 |
| Specific Gravity (20℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosage according to water quality analysis report and system conditions. Typical dosage of this reverse osmosis antiscalant is 2‑6 ppm, diluted 10‑fold with demineralized water.
▲ Dose the chemical agent upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing antiscalant solution.
▲ Clean the chemical tank regularly to prevent bacterial growth.
ENK‑104 Reverse Osmosis Membrane Antiscalant (For High‑Silica Water). Take proper labor protection during operation. Avoid contact of membrane antiscalant with skin and eyes. In case of contact, rinse with plenty of clean water.
