ENK‑105 reverse osmosis membrane antiscalant is specially formulated for water with high turbidity and high COD, suitable for river water, lake water, reclaimed water and other water sources.It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition.It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ ENK‑105 reverse osmosis membrane antiscalant is specially formulated for water with high turbidity and high COD, suitable for river water, lake water, reclaimed water and other water sources.
▲ It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ Applicable to reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ JQSY reverse osmosis antiscalant features good solubility and stability.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Light‑yellow transparent liquid |
| pH (1% solution) | 2.0±1.0 |
| Specific Gravity (20℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosing concentration according to water quality analysis report and system conditions. Typical dosage of this reverse osmosis antiscalant is 3‑8 ppm, diluted 10‑fold with demineralized water.
▲ Dose the chemical agent upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing chemical solution.
▲ Clean the chemical tank regularly to prevent bacterial growth.
※ Packed in plastic drums, 20 kg or 25 kg per drum.
※ Stable physical‑chemical properties. Store in cool place. Shelf‑life: 2 years.
ENK‑105 Reverse Osmosis Membrane Antiscalant (For High‑Turbidity & High‑COD Water). Take proper labor protection during operation. Avoid contact of reverse osmosis antiscalant with skin and eyes. In case of contact, rinse with plenty of clean water.
▲ ENK‑105 reverse osmosis membrane antiscalant is specially formulated for water with high turbidity and high COD, suitable for river water, lake water, reclaimed water and other water sources.
▲ It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances.
▲ Applicable to reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ JQSY reverse osmosis antiscalant features good solubility and stability.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Light‑yellow transparent liquid |
| pH (1% solution) | 2.0±1.0 |
| Specific Gravity (20℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosing concentration according to water quality analysis report and system conditions. Typical dosage of this reverse osmosis antiscalant is 3‑8 ppm, diluted 10‑fold with demineralized water.
▲ Dose the chemical agent upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing chemical solution.
▲ Clean the chemical tank regularly to prevent bacterial growth.
※ Packed in plastic drums, 20 kg or 25 kg per drum.
※ Stable physical‑chemical properties. Store in cool place. Shelf‑life: 2 years.
ENK‑105 Reverse Osmosis Membrane Antiscalant (For High‑Turbidity & High‑COD Water). Take proper labor protection during operation. Avoid contact of reverse osmosis antiscalant with skin and eyes. In case of contact, rinse with plenty of clean water.
