ENK‑106 membrane antiscalant for reclaimed water reuse is developed for reclaimed water quality. It controls scaling caused by precipitation of calcium carbonate, calcium sulfate and iron oxide. It can extend the system cleaning cycle, prolong membrane service life and reduce operating costs.
ENK‑106 membrane antiscalant for reclaimed water reuse is developed for reclaimed water quality. It controls scaling caused by precipitation of calcium carbonate, calcium sulfate and iron oxide. It can extend the system cleaning cycle, prolong membrane service life and reduce operating costs.
▲ It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances. ▲ This reclaimed‑water‑reuse antiscalant is applicable to reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ It disperses colloids and particulate matters to prevent membrane deposition and keep the membrane surface clean.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Pale‑yellow transparent liquid |
| pH (1% solution) | 2.5±1.0 |
| Specific Gravity (25℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosing concentration according to water quality analysis report and system conditions. The dosage of this antiscalant recommended by JQSY engineers is generally 3‑8 ppm, diluted 10‑fold with demineralized water.
▲ Dose upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing chemical solution of reclaimed‑water‑reuse antiscalant.
▲ Clean the chemical tank regularly to prevent bacterial growth.
※ Packed in plastic drums, 20 kg or 25 kg per drum.
※ Stable physical‑chemical properties. Store in cool place. Shelf‑life: 2 years.
Take proper labor protection during operation. Avoid contact of this membrane antiscalant for reclaimed water reuse with skin and eyes. In case of contact, rinse with plenty of clean water.
ENK‑106 membrane antiscalant for reclaimed water reuse is developed for reclaimed water quality. It controls scaling caused by precipitation of calcium carbonate, calcium sulfate and iron oxide. It can extend the system cleaning cycle, prolong membrane service life and reduce operating costs.
▲ It can effectively control inorganic scaling within a broad concentration range. The allowable LSI value can reach up to 3.0 without acid addition.
▲ It will not coagulate with iron‑aluminum oxides and silicon compounds to form insoluble substances. ▲ This reclaimed‑water‑reuse antiscalant is applicable to reverse osmosis CA and TFC membranes, nanofiltration membranes and ultrafiltration membranes.
▲ It disperses colloids and particulate matters to prevent membrane deposition and keep the membrane surface clean.
▲ It remains effective at feed‑water pH ranging from 5 to 10.
| Item | Specification |
|---|---|
| Appearance | Pale‑yellow transparent liquid |
| pH (1% solution) | 2.5±1.0 |
| Specific Gravity (25℃, g/cm³) | 1.10±0.05 |
Calculate the proper dosing concentration according to water quality analysis report and system conditions. The dosage of this antiscalant recommended by JQSY engineers is generally 3‑8 ppm, diluted 10‑fold with demineralized water.
▲ Dose upstream of the cartridge filter.
▲ Calibrate the actual output of the metering pump.
▲ Stir thoroughly for 15‑20 minutes when preparing chemical solution of reclaimed‑water‑reuse antiscalant.
▲ Clean the chemical tank regularly to prevent bacterial growth.
※ Packed in plastic drums, 20 kg or 25 kg per drum.
※ Stable physical‑chemical properties. Store in cool place. Shelf‑life: 2 years.
Take proper labor protection during operation. Avoid contact of this membrane antiscalant for reclaimed water reuse with skin and eyes. In case of contact, rinse with plenty of clean water.
