Reverse osmosis flocculant is mainly used in reverse osmosis pretreatment systems.
▲ Reverse osmosis flocculant is mainly used in reverse osmosis pretreatment systems. It can partially or completely replace the existing inorganic coagulants of aluminum and iron salts, and can be used alone or mixed with aluminum and iron salts.
▲ It features a wide applicable pH range for water bodies, fast coagulation speed, dense and firm flocs, and good settling performance.
▲ It is also effective for turbidity removal, bacteria and algae elimination. It is not affected by chlorination treatment and will not raise soluble metal (aluminum, iron) content in treated water.
▲ JQSY membrane flocculant can improve solid‑liquid separation speed and extend the operating cycle of filters under direct filtration conditions.
▲ It is miscible with water in any proportion.
| Item | Specification |
|---|---|
| Appearance | Colorless to pale‑yellow viscous liquid |
| pH (1% solution) | 3.0‑9.0 |
| Specific Gravity (20℃, g/cm³) | 1.050±0.05 |
| Shelf‑life | 1 year |
▲ EX‑401 is a reverse osmosis flocculant compounded with refined inorganic salts and high‑molecular polymers. Besides the strong charge neutralization and adsorption‑flocculation capacity of inorganic polymeric flocculants, it also provides powerful adsorption‑bridging effect of organic polymeric flocculants. Therefore, this product is widely applied in multimedia filter processes to realize flocculation and sedimentation.
▲ This product performs better in water with high‑pH value. No special requirements are required for dosing systems and material compatibility.
☆ The dilution ratio shall be less than 10 times, or the reverse osmosis flocculant can be dosed undiluted, depending on the configuration of the dosing system. Please consult JQSY technical staff before dosing. ☆ Technical personnel will recommend a suitable dosage according to water quality and process characteristics. Better results can be achieved through on‑site commissioning. Typical dosage: 4‑10 ppm. ☆ The chemical injection point shall be 5.0‑7.0 meters away from the filter inlet. The injection nozzle shall be located at the center of the water pipeline to ensure uniform mixing of chemical agent under turbulent flow.
※ Packed in plastic drums, 20 kg or 25 kg per drum. ※ JQSY membrane flocculant features stable physical‑chemical properties. Store in cool place. Shelf‑life: 1 year.
For EX‑401 Reverse Osmosis Membrane Flocculant, take proper labor protection during operation. Avoid contact of flocculant with skin and eyes. In case of contact, rinse with plenty of clean water.
▲ Reverse osmosis flocculant is mainly used in reverse osmosis pretreatment systems. It can partially or completely replace the existing inorganic coagulants of aluminum and iron salts, and can be used alone or mixed with aluminum and iron salts.
▲ It features a wide applicable pH range for water bodies, fast coagulation speed, dense and firm flocs, and good settling performance.
▲ It is also effective for turbidity removal, bacteria and algae elimination. It is not affected by chlorination treatment and will not raise soluble metal (aluminum, iron) content in treated water.
▲ JQSY membrane flocculant can improve solid‑liquid separation speed and extend the operating cycle of filters under direct filtration conditions.
▲ It is miscible with water in any proportion.
| Item | Specification |
|---|---|
| Appearance | Colorless to pale‑yellow viscous liquid |
| pH (1% solution) | 3.0‑9.0 |
| Specific Gravity (20℃, g/cm³) | 1.050±0.05 |
| Shelf‑life | 1 year |
▲ EX‑401 is a reverse osmosis flocculant compounded with refined inorganic salts and high‑molecular polymers. Besides the strong charge neutralization and adsorption‑flocculation capacity of inorganic polymeric flocculants, it also provides powerful adsorption‑bridging effect of organic polymeric flocculants. Therefore, this product is widely applied in multimedia filter processes to realize flocculation and sedimentation.
▲ This product performs better in water with high‑pH value. No special requirements are required for dosing systems and material compatibility.
☆ The dilution ratio shall be less than 10 times, or the reverse osmosis flocculant can be dosed undiluted, depending on the configuration of the dosing system. Please consult JQSY technical staff before dosing. ☆ Technical personnel will recommend a suitable dosage according to water quality and process characteristics. Better results can be achieved through on‑site commissioning. Typical dosage: 4‑10 ppm. ☆ The chemical injection point shall be 5.0‑7.0 meters away from the filter inlet. The injection nozzle shall be located at the center of the water pipeline to ensure uniform mixing of chemical agent under turbulent flow.
※ Packed in plastic drums, 20 kg or 25 kg per drum. ※ JQSY membrane flocculant features stable physical‑chemical properties. Store in cool place. Shelf‑life: 1 year.
For EX‑401 Reverse Osmosis Membrane Flocculant, take proper labor protection during operation. Avoid contact of flocculant with skin and eyes. In case of contact, rinse with plenty of clean water.
