Performance and ApplicationReverse osmosis membrane reducing agent is an RO‑membrane reducing agent developed to prevent irreversible oxidative damage to reverse osmosis membranes caused by residua
Reverse osmosis membrane reducing agent is an RO‑membrane reducing agent developed to prevent irreversible oxidative damage to reverse osmosis membranes caused by residual chlorine. Its active ingredients can rapidly decompose residual chlorine and protect membranes from oxidation. It is used to remove residual chlorine and other oxidizing substances in the feed water of membrane systems.
| Item | Specification |
|---|---|
| Appearance | White powder |
| Solubility | Soluble in water, slightly soluble in alcohol |
| Incompatible Materials | Strong oxidants, strong acids, strong alkalis |
▲ The specific dosage of reverse osmosis reducing agent depends on the residual chlorine content in water. Generally, 2 ppm of chemical agent is required to remove 1 ppm residual chlorine.
▲ Dilute with demineralized water or other soft water; the dilution concentration shall not exceed 20%. ▲ The diluted membrane‑reducing solution must be used up within one week, as oxygen will deactivate the product.
When handling EH‑602 Reverse Osmosis Membrane Reducing Agent (Solid), wear latex gloves, protective goggles and protective clothing. In case of splashing into eyes, immediately flush eyes with plenty of clean water and seek medical attention promptly.
Reverse osmosis membrane reducing agent is an RO‑membrane reducing agent developed to prevent irreversible oxidative damage to reverse osmosis membranes caused by residual chlorine. Its active ingredients can rapidly decompose residual chlorine and protect membranes from oxidation. It is used to remove residual chlorine and other oxidizing substances in the feed water of membrane systems.
| Item | Specification |
|---|---|
| Appearance | White powder |
| Solubility | Soluble in water, slightly soluble in alcohol |
| Incompatible Materials | Strong oxidants, strong acids, strong alkalis |
▲ The specific dosage of reverse osmosis reducing agent depends on the residual chlorine content in water. Generally, 2 ppm of chemical agent is required to remove 1 ppm residual chlorine.
▲ Dilute with demineralized water or other soft water; the dilution concentration shall not exceed 20%. ▲ The diluted membrane‑reducing solution must be used up within one week, as oxygen will deactivate the product.
When handling EH‑602 Reverse Osmosis Membrane Reducing Agent (Solid), wear latex gloves, protective goggles and protective clothing. In case of splashing into eyes, immediately flush eyes with plenty of clean water and seek medical attention promptly.