Suitable for cleaning complete EDI systems; Effectively removes oil and organic substances from surfaces;Better performance when used together with EQ‑512;
▲ Suitable for cleaning complete EDI systems;
▲ Effectively removes oil and organic substances from surfaces;
▲ Better performance when used together with EQ‑512;
▲ Higher temperature brings better cleaning effect;
▲ Adjust pH of diluted solution to 2.0‑4.0.
| Item | Specification |
|---|---|
| Appearance | Pale‑yellow transparent liquid |
| Density | 1.2±0.05 g/cm³ |
| pH | 2.0‑4.0 |
| Freezing Point | ＜‑15℃ |
EQ‑512 is an acidic liquid formulation, mainly used to remove oil, organics, colloids, microorganisms and particulate matter. It is compatible with all types of EDI modules. Excellent cleaning performance can extend the operating time and service life of EDI stacks.
Normal dilution ratio: 1.0‑3.0 % of total cleaning solution volume.
▲ Inspect and flush the whole EDI cleaning system to keep it clean;
▲ Before cleaning, identify the contamination type and root cause of EDI elements. Targeted cleaning is required; avoid blind cleaning. After cleaning, analyze contamination causes and implement corresponding pre‑treatment preventive measures;
▲ During cleaning, keep the cleaning solution temperature within 15‑38 ℃ at all times;
▲ Follow the flow rate recommended by EDI manufacturer or chemical supplier. Flow rate and soaking time shall be determined according to contamination type and severity of EDI elements. If no recommended data is available, technical engineers from JQSY Water can provide field‑based guidance;
▲ For heavily contaminated systems, consult chemical or EDI suppliers for optimized cleaning procedures;
▲ Before putting the system back into service, rinse thoroughly with EDI product water until TDS ≤5 ppm and pH returns to normal range.
Packed in plastic drums, 25 kg per drum. Stable physical‑chemical properties. Store in cool place. Shelf‑life: 3 years.
▲ Suitable for cleaning complete EDI systems;
▲ Effectively removes oil and organic substances from surfaces;
▲ Better performance when used together with EQ‑512;
▲ Higher temperature brings better cleaning effect;
▲ Adjust pH of diluted solution to 2.0‑4.0.
| Item | Specification |
|---|---|
| Appearance | Pale‑yellow transparent liquid |
| Density | 1.2±0.05 g/cm³ |
| pH | 2.0‑4.0 |
| Freezing Point | ＜‑15℃ |
EQ‑512 is an acidic liquid formulation, mainly used to remove oil, organics, colloids, microorganisms and particulate matter. It is compatible with all types of EDI modules. Excellent cleaning performance can extend the operating time and service life of EDI stacks.
Normal dilution ratio: 1.0‑3.0 % of total cleaning solution volume.
▲ Inspect and flush the whole EDI cleaning system to keep it clean;
▲ Before cleaning, identify the contamination type and root cause of EDI elements. Targeted cleaning is required; avoid blind cleaning. After cleaning, analyze contamination causes and implement corresponding pre‑treatment preventive measures;
▲ During cleaning, keep the cleaning solution temperature within 15‑38 ℃ at all times;
▲ Follow the flow rate recommended by EDI manufacturer or chemical supplier. Flow rate and soaking time shall be determined according to contamination type and severity of EDI elements. If no recommended data is available, technical engineers from JQSY Water can provide field‑based guidance;
▲ For heavily contaminated systems, consult chemical or EDI suppliers for optimized cleaning procedures;
▲ Before putting the system back into service, rinse thoroughly with EDI product water until TDS ≤5 ppm and pH returns to normal range.
Packed in plastic drums, 25 kg per drum. Stable physical‑chemical properties. Store in cool place. Shelf‑life: 3 years.
