AK‑650 corrosion‑enhancing agent is specially developed for corrosion‑prone water in circulating cooling‑water systems. Low‑hardness water contains low‑level calcium and magnesium ions and hardly forms scale, so corrosion becomes the primary concern. Developed based on extensive experimental screening, AK‑650 is an eco‑friendly corrosion‑enhancing agent tailored for such scenarios.
AK‑650 corrosion‑enhancing agent is specially developed for corrosion‑prone water in circulating cooling‑water systems. Low‑hardness water contains low‑level calcium and magnesium ions and hardly forms scale, so corrosion becomes the primary concern. Developed based on extensive experimental screening, AK‑650 is an eco‑friendly corrosion‑enhancing agent tailored for such scenarios.
It shall be used together with corrosion & scale inhibitors to boost the system’s corrosion‑inhibiting performance. It forms a uniform protective film on the cathodic areas of metal surfaces to ensure stable and safe operation of circulating‑water systems.
| Item | Specification |
|---|---|
| Appearance | Colorless to pale‑yellow transparent liquid |
| pH value (1% solution) | 2.0‑7.0 |
| Specific Gravity (20℃, g/cm³) | ≥1.10 |
Add daily required dosage of corrosion‑enhancing agent into plastic chemical‑feeding tank. It may be diluted with soft water for convenient operation, then continuously dosed at the inlet of circulating pump (outlet of collecting basin) via metering pump or regulating valve. The dosage recommended by JQSY engineers is generally 5‑20 mg/L, calculated on makeup water volume. Optimal performance is achieved when used in combination with corrosion & scale inhibitors.
AK‑650 Corrosion‑Enhancing Agent is weakly acidic. Take proper labor protection during operation. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of clean water.
AK‑650 corrosion‑enhancing agent is specially developed for corrosion‑prone water in circulating cooling‑water systems. Low‑hardness water contains low‑level calcium and magnesium ions and hardly forms scale, so corrosion becomes the primary concern. Developed based on extensive experimental screening, AK‑650 is an eco‑friendly corrosion‑enhancing agent tailored for such scenarios.
It shall be used together with corrosion & scale inhibitors to boost the system’s corrosion‑inhibiting performance. It forms a uniform protective film on the cathodic areas of metal surfaces to ensure stable and safe operation of circulating‑water systems.
| Item | Specification |
|---|---|
| Appearance | Colorless to pale‑yellow transparent liquid |
| pH value (1% solution) | 2.0‑7.0 |
| Specific Gravity (20℃, g/cm³) | ≥1.10 |
Add daily required dosage of corrosion‑enhancing agent into plastic chemical‑feeding tank. It may be diluted with soft water for convenient operation, then continuously dosed at the inlet of circulating pump (outlet of collecting basin) via metering pump or regulating valve. The dosage recommended by JQSY engineers is generally 5‑20 mg/L, calculated on makeup water volume. Optimal performance is achieved when used in combination with corrosion & scale inhibitors.
AK‑650 Corrosion‑Enhancing Agent is weakly acidic. Take proper labor protection during operation. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of clean water.
