JQSY KS‑391 high‑efficiency slime remover is compounded of cationic surfactants, penetrants and dispersants. It delivers broad‑spectrum bactericidal and algaecidal performance, together with powerful slime stripping and cleaning capabilities. KS‑391 possesses favorable dispersibility and permeability, featuring strong penetration, low toxicity and fast action. It effectively decomposes and strips slime composed of biological slime, oily sludge, microbial‑algal secretions and algae‑bacteria biomass. Meanwhile, it softens and removes aged deposits on metal surfaces, provides mild corrosion inhibition and improves heat‑exchange efficiency of equipment.
▲ JQSY KS‑391 high‑efficiency slime remover is compounded of cationic surfactants, penetrants and dispersants. It delivers broad‑spectrum bactericidal and algaecidal performance, together with powerful slime stripping and cleaning capabilities.
▲ KS‑391 possesses favorable dispersibility and permeability, featuring strong penetration, low toxicity and fast action. It effectively decomposes and strips slime composed of biological slime, oily sludge, microbial‑algal secretions and algae‑bacteria biomass. Meanwhile, it softens and removes aged deposits on metal surfaces, provides mild corrosion inhibition and improves heat‑exchange efficiency of equipment.
▲ This slime remover can be used as bactericide‑algaecide and cleaning agent for circulating water systems, as well as preservative for papermaking processes.
▲ KS‑391 is non‑corrosive to metals, rubber and plastics. It is readily water‑soluble and not affected by water hardness. Hence it is widely applied for slime stripping and cleaning in circulating‑water systems across multiple industries.
| Item | Specification |
|---|---|
| Appearance | Colorless transparent liquid |
| pH (neat solution) | 6.0‑8.0 |
| Specific Gravity (20℃, g/cm³) | 0.97±0.02 |
▲ For slime‑stripping treatment, dose 200‑300 ppm calculated on system hold‑up water volume. Dosage may be increased appropriately for rapid killing and stripping under heavy algal contamination.
▲ Floating contaminants generated by slime stripping after dosing shall be removed promptly to prevent secondary deposition.
▲ When used as bactericide‑algaecide, the dosage recommended by JQSY technical engineers is 50‑100 mg/L.
▲ Do not mix KS‑391 with anionic surfactants such as PAA, HPMA, nor with chlorophenol‑based chemicals.
※ Packed in plastic drums, 25 kg per drum.
※ JQSY slime remover has stable physical‑chemical properties. Store in cool place. Shelf‑life: 12 months.
KS‑391 Slime Remover. Take proper labor protection during operation. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of clean water.
▲ JQSY KS‑391 high‑efficiency slime remover is compounded of cationic surfactants, penetrants and dispersants. It delivers broad‑spectrum bactericidal and algaecidal performance, together with powerful slime stripping and cleaning capabilities.
▲ KS‑391 possesses favorable dispersibility and permeability, featuring strong penetration, low toxicity and fast action. It effectively decomposes and strips slime composed of biological slime, oily sludge, microbial‑algal secretions and algae‑bacteria biomass. Meanwhile, it softens and removes aged deposits on metal surfaces, provides mild corrosion inhibition and improves heat‑exchange efficiency of equipment.
▲ This slime remover can be used as bactericide‑algaecide and cleaning agent for circulating water systems, as well as preservative for papermaking processes.
▲ KS‑391 is non‑corrosive to metals, rubber and plastics. It is readily water‑soluble and not affected by water hardness. Hence it is widely applied for slime stripping and cleaning in circulating‑water systems across multiple industries.
| Item | Specification |
|---|---|
| Appearance | Colorless transparent liquid |
| pH (neat solution) | 6.0‑8.0 |
| Specific Gravity (20℃, g/cm³) | 0.97±0.02 |
▲ For slime‑stripping treatment, dose 200‑300 ppm calculated on system hold‑up water volume. Dosage may be increased appropriately for rapid killing and stripping under heavy algal contamination.
▲ Floating contaminants generated by slime stripping after dosing shall be removed promptly to prevent secondary deposition.
▲ When used as bactericide‑algaecide, the dosage recommended by JQSY technical engineers is 50‑100 mg/L.
▲ Do not mix KS‑391 with anionic surfactants such as PAA, HPMA, nor with chlorophenol‑based chemicals.
※ Packed in plastic drums, 25 kg per drum.
※ JQSY slime remover has stable physical‑chemical properties. Store in cool place. Shelf‑life: 12 months.
KS‑391 Slime Remover. Take proper labor protection during operation. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of clean water.
